• Power Factor 1 (kVA=kW)
• High Efficiency 97%
• System Parallel
• Fault Trace Management
• Most compact 100KW module 3U
High Reliability
- Wide input voltage range -60%~+25% with high grid adaptability
- High overload capacity
- Hot-swappable function ensures uninterrupted operations during
maintenance - Dual system control card and dual DSP control prevents single
failure point - Intelligent fan control and redundant design for energy saving: 25%
load can be driven when 2 fans fail and 50% load when 1 fan fails - Integrated with input,output,bypass breaker and manual bypass
switch for better protection of system. - EPO function as standard for immediataly remove power from
connected load in the event of emergency - Anti-corrosion resistant coating in all PCB boards.
- Cabinet temperature detection and pre-alarm which prevent over
temperature accident.
Green power
- AC/AC efficiency up to 97% and 30% load up to 96% efficiency
reduces heat dissipation and limits power consumption costs - ECO mode efficiency up to 99% ingives significant cost reduction.
W-ECO mode could reach 98.5% efficiency, THDi below 5% and
transfer time below 5ms to reduce TCO. - High input power factor up to 0.99 and low Input
THDi: < 3.0% at full load, much less grid pollution and costs - Advanced and compact 3U height 100KW power module
equip with maximum 30A charger. - Self-load test function, easy debugging and easy onsite test
during commissioning, before it is connected the real load,
without using costly temporary loads, cabling and breakers
for energy saving. - Advanced power module sleep mode, prolong the service life
of power module
Advanced technology
- Three level technology, Low harmonic, high efficiency, effectively
energy-saving. - Power walk in function decrease the inrush to mains or generator.
- Advanced parallel expansion technology, support 8 units up to
9.6MW in parallel, single /parallel system compatible. - Self-dedusting function which save the preventive service time.
- Parallel ECO mode maximum whole system effciency.
- Common battery bank on parallel mode.
- Frequency converter function(60Hz to 50Hz or 50Hz to 60Hz)
- Lithium Battery compatible.
User-friendly Interface
- User-friendly ON/OFF – Double physical button design to avoid false
operation. - 7-inch touch screen with LED Indicators, ensure comprehensive
and visualized information display. - Large data storage capacity,10000pcs events logs.
- Friendly human-machine interface with data and graphical
forms. - Support software update at site, one time update for all power
module and control module. - ON/OFF – Double Button design to prevent misoperation and touch
screen failure - Smart programmable dry contact communication function.
- Main unit display allow to check the information of each parallel
unit
Intelligent Management
- Fault Trace Management (FTM) for convenient failure analysis(
waveform record before & after of the fault point for 200ms) which
easily figure out faulty point. - 3 stage battery charging system, prolong the service life of batteries
- Intelligent battery management, 30-50 pcs batteries per string allow
customers to get the faulty battery out instead of replacing it - Key components pre-alarm function which precaution the system
fault. - Full asset management record the spare parts replacement, timeline
and service people
Options
Battery Monitoring Solutions:
- Advanced battery monitoring per block
voltage, Impedance, and temperature.
Flexible Network Management:
- Optional internal SNMP adapter
- Customer interface software
Intelligent management software
- Smart status diagnosis
- Abnormal status real time alarm
- Event logs recording
- Parameters real time monitoring
More Options
- Bypass voltage regulator
- Extended dry contact card
- BMS card for lithium battery
- Input and output isolation transformer
- Output Synchronization Common Bus
- Battery Charge Temperature Compensation
Specifications TECNED X-PND 400-1200kVA
| MODEL | X-PND400 | X-PND500 | X-PND600 | X-PND800 | X-PND1000 | X-PND1200 |
| Power module Model | XPD-100 | |||||
| Voltage Range (Vac) | 3Φ4W+PE,380/400/415 L:L 138~485 | |||||
| Input Wiring | 3Ph+N+PE | |||||
| Input Frequency (Hz) | 40-70 | |||||
| Bypass Voltage Range (Vac) | -20%(10/15/30/40/50/60%)~+15%(10/20/25% | |||||
| Power Factor | ≥0.99 | |||||
| THDi at full Linear load | <3% | |||||
| Output | ||||||
| Power Module (kVA) | 100 | |||||
| Power Module Number | 4 | 5 | 6 | 8 | 10 | 12 |
| System Capacity (kVA) | 400 | 500 | 600 | 800 | 1000 | 1200 |
| Power Factor | 1 | |||||
| Voltage (Vac) | 3Φ4W+PE,L-L:380,400,415 ±1% | |||||
| Frequency (Hz) | 50/60± 0.2% (battery mode) | |||||
| Three Phase Difference | True sine wave,≤2 degrees | |||||
| THDv | ≤1% (linear load, full load); ≤4% (nolinear load, full load) | |||||
| Static Bypass Transfer Time | 0 | |||||
| System Efficiency (MAX) | 97% | |||||
| Overload Capacity | 101-105% Long run, 106-110% load for 60 minutes, 111%-125% load for 10 minutes,126%-150% load for 1 minute, over 150% load transfer | |||||
| Battery | ||||||
| Battery Voltage (Vdc)* | ±240 (±180~±300 settable) | |||||
| Charging Current (A) | N×30 Maximum (N = the number of power module) | |||||
| Others | ||||||
| Display | 7 inch Touch screen+ LED+ Physical buttons | |||||
| Operating Temperature (oC) | 0~40 | |||||
| Storage Temperature (oC) | -40~70 | |||||
| Relative Humidity | 0~95%, no condensation | |||||
| Communication Function | RS232, RS485,Dry contact, MODBUS, SNMP (optional) | |||||
| Noise (dB) | 70 | |||||
| Altitude(m) | 0~2000, no derate | |||||
| Cabling | Bottom/Top | Top | ||||
| Power Module Dimension (W×D×H)(mm) | 500×750×130(3U) | |||||
| Cabinet Dimension (W×D×H)(mm) | 1200×1000×2000 | 1400x1000×2000 | 1800x1000×2000 | |||
| Weight (kg) Cabinet | 400 | 506 | 580 | 650 | 740 | |
| Weight (kg) Power Module | 55 | |||||