Green Power
• AC/AC efficiency up to 95%, less operation cost and more energy saving
• ECO mode with 99% efficiency to conserve energy
• Output power factor up to 1, more powerful to connect more critical loads
• Input PF=1 and THDi <5%, less power pollution and lower TCO

Flexible Configuration
• Adjustable input and output to 11/31/33
• Dry contact standard
• RS-485 with Modbus standard
• Parallel card standard
• SNMP with preloaded web interface (option)
• RS-232 / Profibus / TCP-IP (option)
• External battery connection (option)

Intelligent LCD Display
• Intuitive LCD display with easy setup screens
• Alarm information display, battery backup monitor, operation mode setting
TECNED UPS MODEL FLEX 10 FLEX 15 FLEX 20 FLEX 30 FLEX 40
Input
Voltage (Vac) 150-280 (L-N) or 260-485 (L-L)
Frequency (Hz) 40-70
Power Factor ≥ 0.99
THDi < 5%
Output
Capacity (kVA) 10 15 20 30 40
AC/AC Efficiency Up to 95%
Power Factor Up to PF 1
Voltage (Vac) 220/230/240 (L-N) 380/400/415 ± 1% (L-L), programmable
Frequency (Hz) 50/60 ± 0.1% (on battery)
THDv THD <2% (linear load),
THD <3% (nonlinear load)
Transfer Time (ms) 0
Overload 125% for 10 min, 150% for 1 min
ECOMode Yes
Battery
Voltage (Vdc) ± 120 – 280Vdc programmable / 25% derating < 158Vdc
Charging Current (A) 4 (1-10A programmable) 8 (1-20A programmable)
12V VRL /1.2V Nicd ± 12-20 block / ± 120-170 cells
Communication Interface RS485 MODBUS + EPO + dry contact standard

TCP – IP / SNMP / RS232 option

Input / Output configuration 11 / 31 / 33 31 / 33
Display Blue screen LCD
Alarm Low battery, Abnormal AC input, UPS failure
Protection Low battery, overload, short – circuit and over temperature, etc.
Noise (dB) < 55
Working Temperature (°C) -5 ~ 40
Relative Humidity ± 0 ~ 95%, No condensation
Dimension (W×D×H)(mm) 1125 x 510  x  600 1450  x  510  x  790
Weight with (w/o) battery (kg) 175 (90) 200 (90) 265 (90) 330 (90) 435 (90)
International standards IEC 62040-1, YD – T 1095-2018, GB / T 14715-2017